Updated: 12/27/2005
RNS-E Installation -
(The Female 20 pin connector for Symphony I and II)
20 pin (Connector I) split into three distinct sections:
- Blue: 8 pins for OEM CD Changer, PhatBox or Blitzsafe
or IceLINK interface etc.
- Green: 6 pins for various functions (CAN H, CAN L etc)
- Yellow: 6 pins for line-level output to Bose or
aftermarket amplifier
20 pin (Connector I) typically found as one unit:
I relocated the pins to the blue/green/yellow version
for a “modular” approach to upgrading to the RNS-E.
In connector I, you only need to slide a purple
“locking bar” out a bit to remove/add any female
pins.
There are clips on the
other side of these
holes that allow you
to slide these
connectors off from
each other.
You’ll need to remove this yellow “locking bar” in connectors II, III
and IV (use an exacto-knife or razor blade) before
removing/adding any female pins.
1k.
Comments to this Manuals