Updated: 12/27/2005
Audi Part#:
000-979-018
CAN H & L wires will be
routed to the 20 pin
connector behind my
RNS-E
A second set of CAN H & L wires were spliced
into this harness (and left under the lower dash
area) for future installation of:
• OEM SAT (XM or Sirius) tuner and/or
• OEM BlueTooth cell phone kit and/or
• Dietz A/V interface
or other devices that require an interface in to
the CANbus network.
Routed to the
instrument cluster for
CAN H & L interface
OEM SAT Tuner Installation – Access to CANbus (High and Low)
Option A (pre-2002 C5 A6): make sure you have access to CANbus to control the SAT tuner
Please note: This is applicable to a pre-2002 C5 A6/allroad. Because you will be taping into the
CANbus from behind the instrument cluster. It just makes sense to have an extra set of wires for CAN
H/L inside the dash for future OEM upgrades etc that require a connection into the CANbus.
3e.
Comments to this Manuals